General Cleaning Instructions
One of the best ways to keep Ultrafabrics, LLC brand surfaces looking great is to properly maintain them by cleaning regularly to prevent excessive dirt from accumulating. Below is a general outline to help you keep your quality Ultrafabrics brand products looking their best.
Following these guidelines will help to extend the life of the fabric:
• Clean regularly with soap and water
• Wipe up spills as soon as they occur
• Alcohol based cleaners such as Fantastik® and Formula 409® can be used to clean and remove stains
• Sanitize using disinfectants such as 1:5 bleach/water solution
• For stubborn stains, wipe the stain off with isopropyl (rubbing alcohol)
as soon as possible
• Thoroughly rinse all solution residue with clean water
• Air dry
THESE ARE OPTIONS WHEN PURCHASING CHAIRS AND CAN'T BE ORDERED INDIVIDUALLY.
$ 5.00
Composition: | 100% Polyurethane Surface 100% Reinforced Rayon Backing |
Weight: |
Approx. 9.3 oz. per square yard Approx. 315 grams per square metre |
Thickness: | Approx. 1.0 millimetres |
Width: | 54 inches / 137 centimetres |
Putup: | Approx. 33 yds / 30 metres R.O.T. |
Abrasion: | ASTM D 4157 - 300,000 Double Rubs (Wyzenbeek) BS 2543 - 120,000 Rubs (Martindale) |
Air Permeability: | ASTM D 737 |
Antimicrobial: | N/A |
Dimensional Change: | ASTM D 3597 |
Hydrolysis: | ASTM D 3690-02 SECT. 6.11 (Hydrolytic Stability) ISO 1419 Method (Accelerated Ageing) |
Seam Strength: | ASTM D 751 |
Stretch & Set: | SAE J855 |
Tear Strength: | ASTM D 5733 |
Tensile Strength: | ASTM D 5034 |
Crocking: |
AATCC 8, CLASS 5 Wet & Dry |
Light: | AATCC 16E, AATCC 16A, CLASS 4–5 ISO 105 – B02 : 1999 Grade 7/8 |
Gas: | AATCC 23, CLASS 5 |
Ozone: | AATC 109, CLASS 5 |
Flammability: | ASTM E 84 (adhered)--CLASS A CA 117 E--CLASS 1 CA TB 117-2013--PASS FMVSS 302 & 95/28 ANNEX IV--PASS NFPA 260--CLASS 1 UFAC--CLASS 1 |
Sea (Salt) Water: | N/A |
Chlorinated Water: |
N/A |
Perspiration: | N/A |
$ 5.00
Composition: | 100% Polyurethane Surface 100% Reinforced Rayon Backing |
Weight: |
Approx. 9.3 oz. per square yard Approx. 315 grams per square metre |
Thickness: | Approx. 1.0 millimetres |
Width: | 54 inches / 137 centimetres |
Putup: | Approx. 33 yds / 30 metres R.O.T. |
Abrasion: | ASTM D 4157 - 300,000 Double Rubs (Wyzenbeek) BS 2543 - 120,000 Rubs (Martindale) |
Air Permeability: | ASTM D 737 |
Antimicrobial: | N/A |
Dimensional Change: | ASTM D 3597 |
Hydrolysis: | ASTM D 3690-02 SECT. 6.11 (Hydrolytic Stability) ISO 1419 Method (Accelerated Ageing) |
Seam Strength: | ASTM D 751 |
Stretch & Set: | SAE J855 |
Tear Strength: | ASTM D 5733 |
Tensile Strength: | ASTM D 5034 |
Crocking: |
AATCC 8, CLASS 5 Wet & Dry |
Light: | AATCC 16E, AATCC 16A, CLASS 4–5 ISO 105 – B02 : 1999 Grade 7/8 |
Gas: | AATCC 23, CLASS 5 |
Ozone: | AATC 109, CLASS 5 |
Flammability: | ASTM E 84 (adhered)--CLASS A CA 117 E--CLASS 1 CA TB 117-2013--PASS FMVSS 302 & 95/28 ANNEX IV--PASS NFPA 260--CLASS 1 UFAC--CLASS 1 |
Sea (Salt) Water: | N/A |
Chlorinated Water: |
N/A |
Perspiration: | N/A |
$ 5.00
Composition: | 100% Polyurethane Surface 100% Reinforced Rayon Backing |
Weight: |
Approx. 9.3 oz. per square yard Approx. 315 grams per square metre |
Thickness: | Approx. 1.0 millimetres |
Width: | 54 inches / 137 centimetres |
Putup: | Approx. 33 yds / 30 metres R.O.T. |
Abrasion: | ASTM D 4157 - 300,000 Double Rubs (Wyzenbeek) BS 2543 - 120,000 Rubs (Martindale) |
Air Permeability: | ASTM D 737 |
Antimicrobial: | N/A |
Dimensional Change: | ASTM D 3597 |
Hydrolysis: | ASTM D 3690-02 SECT. 6.11 (Hydrolytic Stability) ISO 1419 Method (Accelerated Ageing) |
Seam Strength: | ASTM D 751 |
Stretch & Set: | SAE J855 |
Tear Strength: | ASTM D 5733 |
Tensile Strength: | ASTM D 5034 |
Crocking: |
AATCC 8, CLASS 5 Wet & Dry |
Light: | AATCC 16E, AATCC 16A, CLASS 4–5 ISO 105 – B02 : 1999 Grade 7/8 |
Gas: | AATCC 23, CLASS 5 |
Ozone: | AATC 109, CLASS 5 |
Flammability: | ASTM E 84 (adhered)--CLASS A CA 117 E--CLASS 1 CA TB 117-2013--PASS FMVSS 302 & 95/28 ANNEX IV--PASS NFPA 260--CLASS 1 UFAC--CLASS 1 |
Sea (Salt) Water: | N/A |
Chlorinated Water: |
N/A |
Perspiration: | N/A |
$ 5.00
Composition: | 100% Polyurethane Surface 100% Reinforced Rayon Backing |
Weight: |
Approx. 9.3 oz. per square yard Approx. 315 grams per square metre |
Thickness: | Approx. 1.0 millimetres |
Width: | 54 inches / 137 centimetres |
Putup: | Approx. 33 yds / 30 metres R.O.T. |
Abrasion: | ASTM D 4157 - 300,000 Double Rubs (Wyzenbeek) BS 2543 - 120,000 Rubs (Martindale) |
Air Permeability: | ASTM D 737 |
Antimicrobial: | N/A |
Dimensional Change: | ASTM D 3597 |
Hydrolysis: | ASTM D 3690-02 SECT. 6.11 (Hydrolytic Stability) ISO 1419 Method (Accelerated Ageing) |
Seam Strength: | ASTM D 751 |
Stretch & Set: | SAE J855 |
Tear Strength: | ASTM D 5733 |
Tensile Strength: | ASTM D 5034 |
Crocking: |
AATCC 8, CLASS 5 Wet & Dry |
Light: | AATCC 16E, AATCC 16A, CLASS 4–5 ISO 105 – B02 : 1999 Grade 7/8 |
Gas: | AATCC 23, CLASS 5 |
Ozone: | AATC 109, CLASS 5 |
Flammability: | ASTM E 84 (adhered)--CLASS A CA 117 E--CLASS 1 CA TB 117-2013--PASS FMVSS 302 & 95/28 ANNEX IV--PASS NFPA 260--CLASS 1 UFAC--CLASS 1 |
Sea (Salt) Water: | N/A |
Chlorinated Water: |
N/A |
Perspiration: | N/A |
$ 5.00
Composition: | 100% Polyurethane Surface 100% Reinforced Rayon Backing |
Weight: |
Approx. 9.3 oz. per square yard Approx. 315 grams per square metre |
Thickness: | Approx. 1.0 millimetres |
Width: | 54 inches / 137 centimetres |
Putup: | Approx. 33 yds / 30 metres R.O.T. |
Abrasion: | ASTM D 4157 - 300,000 Double Rubs (Wyzenbeek) BS 2543 - 120,000 Rubs (Martindale) |
Air Permeability: | ASTM D 737 |
Antimicrobial: | N/A |
Dimensional Change: | ASTM D 3597 |
Hydrolysis: | ASTM D 3690-02 SECT. 6.11 (Hydrolytic Stability) ISO 1419 Method (Accelerated Ageing) |
Seam Strength: | ASTM D 751 |
Stretch & Set: | SAE J855 |
Tear Strength: | ASTM D 5733 |
Tensile Strength: | ASTM D 5034 |
Crocking: |
AATCC 8, CLASS 5 Wet & Dry |
Light: | AATCC 16E, AATCC 16A, CLASS 4–5 ISO 105 – B02 : 1999 Grade 7/8 |
Gas: | AATCC 23, CLASS 5 |
Ozone: | AATC 109, CLASS 5 |
Flammability: | ASTM E 84 (adhered)--CLASS A CA 117 E--CLASS 1 CA TB 117-2013--PASS FMVSS 302 & 95/28 ANNEX IV--PASS NFPA 260--CLASS 1 UFAC--CLASS 1 |
Sea (Salt) Water: | N/A |
Chlorinated Water: |
N/A |
Perspiration: | N/A |
$ 5.00
Composition: | 100% Polyurethane Surface 100% Reinforced Rayon Backing |
Weight: |
Approx. 9.3 oz. per square yard Approx. 315 grams per square metre |
Thickness: | Approx. 1.0 millimetres |
Width: | 54 inches / 137 centimetres |
Putup: | Approx. 33 yds / 30 metres R.O.T. |
Abrasion: | ASTM D 4157 - 300,000 Double Rubs (Wyzenbeek) BS 2543 - 120,000 Rubs (Martindale) |
Air Permeability: | ASTM D 737 |
Antimicrobial: | N/A |
Dimensional Change: | ASTM D 3597 |
Hydrolysis: | ASTM D 3690-02 SECT. 6.11 (Hydrolytic Stability) ISO 1419 Method (Accelerated Ageing) |
Seam Strength: | ASTM D 751 |
Stretch & Set: | SAE J855 |
Tear Strength: | ASTM D 5733 |
Tensile Strength: | ASTM D 5034 |
Crocking: |
AATCC 8, CLASS 5 Wet & Dry |
Light: | AATCC 16E, AATCC 16A, CLASS 4–5 ISO 105 – B02 : 1999 Grade 7/8 |
Gas: | AATCC 23, CLASS 5 |
Ozone: | AATC 109, CLASS 5 |
Flammability: | ASTM E 84 (adhered)--CLASS A CA 117 E--CLASS 1 CA TB 117-2013--PASS FMVSS 302 & 95/28 ANNEX IV--PASS NFPA 260--CLASS 1 UFAC--CLASS 1 |
Sea (Salt) Water: | N/A |
Chlorinated Water: |
N/A |
Perspiration: | N/A |
$ 5.00
Composition: | 100% Polyurethane Surface 100% Reinforced Rayon Backing |
Weight: |
Approx. 9.3 oz. per square yard Approx. 315 grams per square metre |
Thickness: | Approx. 1.0 millimetres |
Width: | 54 inches / 137 centimetres |
Putup: | Approx. 33 yds / 30 metres R.O.T. |
Abrasion: | ASTM D 4157 - 300,000 Double Rubs (Wyzenbeek) BS 2543 - 120,000 Rubs (Martindale) |
Air Permeability: | ASTM D 737 |
Antimicrobial: | N/A |
Dimensional Change: | ASTM D 3597 |
Hydrolysis: | ASTM D 3690-02 SECT. 6.11 (Hydrolytic Stability) ISO 1419 Method (Accelerated Ageing) |
Seam Strength: | ASTM D 751 |
Stretch & Set: | SAE J855 |
Tear Strength: | ASTM D 5733 |
Tensile Strength: | ASTM D 5034 |
Crocking: |
AATCC 8, CLASS 5 Wet & Dry |
Light: | AATCC 16E, AATCC 16A, CLASS 4–5 ISO 105 – B02 : 1999 Grade 7/8 |
Gas: | AATCC 23, CLASS 5 |
Ozone: | AATC 109, CLASS 5 |
Flammability: | ASTM E 84 (adhered)--CLASS A CA 117 E--CLASS 1 CA TB 117-2013--PASS FMVSS 302 & 95/28 ANNEX IV--PASS NFPA 260--CLASS 1 UFAC--CLASS 1 |
Sea (Salt) Water: | N/A |
Chlorinated Water: |
N/A |
Perspiration: | N/A |
$ 5.00
Composition: | 100% Polyurethane Surface 100% Reinforced Rayon Backing |
Weight: |
Approx. 9.3 oz. per square yard Approx. 315 grams per square metre |
Thickness: | Approx. 1.0 millimetres |
Width: | 54 inches / 137 centimetres |
Putup: | Approx. 33 yds / 30 metres R.O.T. |
Abrasion: | ASTM D 4157 - 300,000 Double Rubs (Wyzenbeek) BS 2543 - 120,000 Rubs (Martindale) |
Air Permeability: | ASTM D 737 |
Antimicrobial: | N/A |
Dimensional Change: | ASTM D 3597 |
Hydrolysis: | ASTM D 3690-02 SECT. 6.11 (Hydrolytic Stability) ISO 1419 Method (Accelerated Ageing) |
Seam Strength: | ASTM D 751 |
Stretch & Set: | SAE J855 |
Tear Strength: | ASTM D 5733 |
Tensile Strength: | ASTM D 5034 |
Crocking: |
AATCC 8, CLASS 5 Wet & Dry |
Light: | AATCC 16E, AATCC 16A, CLASS 4–5 ISO 105 – B02 : 1999 Grade 7/8 |
Gas: | AATCC 23, CLASS 5 |
Ozone: | AATC 109, CLASS 5 |
Flammability: | ASTM E 84 (adhered)--CLASS A CA 117 E--CLASS 1 CA TB 117-2013--PASS FMVSS 302 & 95/28 ANNEX IV--PASS NFPA 260--CLASS 1 UFAC--CLASS 1 |
Sea (Salt) Water: | N/A |
Chlorinated Water: |
N/A |
Perspiration: | N/A |
$ 5.00
Composition: | 100% Polyurethane Surface 100% Reinforced Rayon Backing |
Weight: |
Approx. 9.3 oz. per square yard Approx. 315 grams per square metre |
Thickness: | Approx. 1.0 millimetres |
Width: | 54 inches / 137 centimetres |
Putup: | Approx. 33 yds / 30 metres R.O.T. |
Abrasion: | ASTM D 4157 - 300,000 Double Rubs (Wyzenbeek) BS 2543 - 120,000 Rubs (Martindale) |
Air Permeability: | ASTM D 737 |
Antimicrobial: | N/A |
Dimensional Change: | ASTM D 3597 |
Hydrolysis: | ASTM D 3690-02 SECT. 6.11 (Hydrolytic Stability) ISO 1419 Method (Accelerated Ageing) |
Seam Strength: | ASTM D 751 |
Stretch & Set: | SAE J855 |
Tear Strength: | ASTM D 5733 |
Tensile Strength: | ASTM D 5034 |
Crocking: |
AATCC 8, CLASS 5 Wet & Dry |
Light: | AATCC 16E, AATCC 16A, CLASS 4–5 ISO 105 – B02 : 1999 Grade 7/8 |
Gas: | AATCC 23, CLASS 5 |
Ozone: | AATC 109, CLASS 5 |
Flammability: | ASTM E 84 (adhered)--CLASS A CA 117 E--CLASS 1 CA TB 117-2013--PASS FMVSS 302 & 95/28 ANNEX IV--PASS NFPA 260--CLASS 1 UFAC--CLASS 1 |
Sea (Salt) Water: | N/A |
Chlorinated Water: |
N/A |
Perspiration: | N/A |
$ 5.00
Composition: | 100% Polyurethane Surface 100% Reinforced Rayon Backing |
Weight: |
Approx. 9.3 oz. per square yard Approx. 315 grams per square metre |
Thickness: | Approx. 1.0 millimetres |
Width: | 54 inches / 137 centimetres |
Putup: | Approx. 33 yds / 30 metres R.O.T. |
Abrasion: | ASTM D 4157 - 300,000 Double Rubs (Wyzenbeek) BS 2543 - 120,000 Rubs (Martindale) |
Air Permeability: | ASTM D 737 |
Antimicrobial: | N/A |
Dimensional Change: | ASTM D 3597 |
Hydrolysis: | ASTM D 3690-02 SECT. 6.11 (Hydrolytic Stability) ISO 1419 Method (Accelerated Ageing) |
Seam Strength: | ASTM D 751 |
Stretch & Set: | SAE J855 |
Tear Strength: | ASTM D 5733 |
Tensile Strength: | ASTM D 5034 |
Crocking: |
AATCC 8, CLASS 5 Wet & Dry |
Light: | AATCC 16E, AATCC 16A, CLASS 4–5 ISO 105 – B02 : 1999 Grade 7/8 |
Gas: | AATCC 23, CLASS 5 |
Ozone: | AATC 109, CLASS 5 |
Flammability: | ASTM E 84 (adhered)--CLASS A CA 117 E--CLASS 1 CA TB 117-2013--PASS FMVSS 302 & 95/28 ANNEX IV--PASS NFPA 260--CLASS 1 UFAC--CLASS 1 |
Sea (Salt) Water: | N/A |
Chlorinated Water: |
N/A |
Perspiration: | N/A |
$ 5.00
Composition: | 100% Polyurethane Surface 100% Reinforced Rayon Backing |
Weight: |
Approx. 9.3 oz. per square yard Approx. 315 grams per square metre |
Thickness: | Approx. 1.0 millimetres |
Width: | 54 inches / 137 centimetres |
Putup: | Approx. 33 yds / 30 metres R.O.T. |
Abrasion: | ASTM D 4157 - 300,000 Double Rubs (Wyzenbeek) BS 2543 - 120,000 Rubs (Martindale) |
Air Permeability: | ASTM D 737 |
Antimicrobial: | N/A |
Dimensional Change: | ASTM D 3597 |
Hydrolysis: | ASTM D 3690-02 SECT. 6.11 (Hydrolytic Stability) ISO 1419 Method (Accelerated Ageing) |
Seam Strength: | ASTM D 751 |
Stretch & Set: | SAE J855 |
Tear Strength: | ASTM D 5733 |
Tensile Strength: | ASTM D 5034 |
Crocking: |
AATCC 8, CLASS 5 Wet & Dry |
Light: | AATCC 16E, AATCC 16A, CLASS 4–5 ISO 105 – B02 : 1999 Grade 7/8 |
Gas: | AATCC 23, CLASS 5 |
Ozone: | AATC 109, CLASS 5 |
Flammability: | ASTM E 84 (adhered)--CLASS A CA 117 E--CLASS 1 CA TB 117-2013--PASS FMVSS 302 & 95/28 ANNEX IV--PASS NFPA 260--CLASS 1 UFAC--CLASS 1 |
Sea (Salt) Water: | N/A |
Chlorinated Water: |
N/A |
Perspiration: | N/A |