$ 1.75
25.310R Black Right Hem Rail End Cap
**sold individually**
$ 1.75
25.310L Black Left Hem Rail End Cap
**sold separately**
$ 1.75
25.311R Beige Right Hem Rail End Cap
**sold individually**
$ 1.75
25.311L Beige Left Hem Rail End Cap
**sold individually**
$ 15.00
40.362 Gen IV 32mm AutoStop (Fits all width shades) |
$ 15.00
40.363 Autostop, 28mm (fits all width shades) the diameter of a quarter.$ 45.00
About the same diameter as a quarter.
Not sure if this is the correct spring for your shade?
Please Call US 866-895-4556 or email us at support@mastertechrv.com
40.346 Medium Gen IV 28mm Spring (38” to 72” wide shades) 19.25" Length |
$ 170.50
Not sure if this is the correct motor for your shade?
Please Call US 866-895-4556 or email us at support@mastertechrv.com
50.338 MCD Black Pearl Switch Motor, dual-range - Roller tube size is 28mm, If you are replacing an obsolete 32mm motor, You will have to transfer your driver from old to new motor.
(Replaces 50.337 Red switch motor)
MCD Black Pearl roller shade motors have patent-pending Sentry early warning low voltage alert function. If voltage starts to drop in the coach, the motor will give an early warning that the voltage is lower than it should be. Set limits will not be lost or changed due to voltage variations.
Benefits of the Black Pearl Motor include:
- more robust with a stronger gearbox (over 25%)
- up to 3 times more holding power
- larger drive gear for added contact and engagement
- six-point motor support system vs. two-point support system
- fixed soft-touch programming switch
- easy-to-identify color-coded wires
$ 35.00
About the same diameter as a quarter.
Not sure if this is the correct spring for your shade?
Please Call US 866-895-4556 or email us at support@mastertechrv.com
40.345 Small Gen IV 28mm Spring (18”-38” wide shades) 13" Length |
$ 1.75
45.215 Clip Mount, 28mm/ 32mm shades (sold individually)$ 45.00
Not sure if this is the correct spring for your shade?
Please Call US 866-895-4556 or email us at support@mastertechrv.com
40.340 Medium Gen IV 32mm Spring (38” to 72” wide shades) 19.25" Length |
$ 1.75
45.214 Clip Mount (Track Mounting), sold individually |
$ 47.50
Not sure if this is the correct spring for your shade? For 36" to 70" wide shades
Spring width is 13-1/4"..
PN- 40.203
A longer spring can be used as long as the width of the tube is longer then the width of the spring and up/stop combined.
Please Call US 866-895-4556 or email us at support@mastertechrv.com
$ 16.50
Fits all 17mm shade tubes.
Please Call US 866-895-4556 or email us at support@mastertechrv.com
$ 1.75
25.307R Large/Right Beige hem rail end cap
**sold individually**
$ 1.75
25.307L Large/Left Beige hem rail end cap
**sold individually**
$ 1.75
25.306R Large/Right Black Hem Rail End Cap
**sold individually**
$ 1.75
25.306L Large/Left Black Hem Rail End Cap
**sold individually**
$ 28.82
Not sure if this is the correct spring for your shade?
Please Call US 866-895-4556 or email us at support@mastertechrv.com
40.339 Small Gen IV 32mm Spring (18”-38” wide shades) 13.75" Length |
$ 58.08
Not sure if this is the correct spring for your shade?
Please Call US 866-895-4556 or email us at support@mastertechrv.com
40.341 Large Gen IV 32mm Spring (72”-80” wide shades) 23.5" Length |
$ 35.00
Not sure if this is the correct spring for your shade?
Spring width is 11-1/2"..
PN- 40.202
A longer spring can be used as long as the width of the tube is longer then the width of the spring and up/stop combined.
Please Call US 866-895-4556 or email us at support@mastertechrv.com
$ 30.00
About the same diameter as a quarter.
Not sure if this is the correct spring for your shade?
Please Call US 866-895-4556 or email us at support@mastertechrv.com
40.344 Mini Gen IV 28mm Spring (10”-18” wide shades) 9.50" Length |
$ 55.75
Not sure if this is the correct spring for your shade? = 14 3/4" spring length.
PN- 40.204
A longer spring can be used as long as the width of the tube is longer then the spring and the up stop combined. However this is the longest 17mm spring.
Please Call US 866-895-4556 or email us at support@mastertechrv.com
$ 30.30
About the same diameter as a quarter.
Not sure if this is the correct spring for your shade?
Please Call US 866-895-4556 or email us at support@mastertechrv.com
40.347 Large Gen IV 28mm Spring (72”-80” wide shades) 23.50" Length |
$ 30.00
Not sure if this is the correct spring for your shade?
Please Call US 866-895-4556 or email us at support@mastertechrv.com
40.338 Mini Gen IV 32mm Spring (10”-18” wide shades) 10" Length |
$ 15.00
MCD Bracket Adjuster Set (2 pack). For 32 mm Springs and Stops 1 black, 1 grey |
$ 4.00
Two-Hole Flat Mount 45.218 clip with tap sold individually |
Sold Out
#22 w/ 3 holes MCD Black Bracket, 90° angle |
$ 180.00
50.226 MCD 15-Channel Remote Controller (Black Pearl Remote Motors)
*DISCONTINUED*: 14-Channel Remote (50.212).
Use 50.226 as a replacement. (Works only with Black Pearl Motors.)
$ 225.00
Black Pearl Edition with Sentry Feature
MCD 50.177 Remote Controlled
12VDC, 870mA, 35RPM, 1.1Nm
MCD Black Pearl roller shade motors have patent-pending Sentry early warning low voltage alert function. If voltage starts to drop in the coach, the motor will give an early warning that the voltage is lower than it should be. Set limits will not be lost or changed due to voltage variations.
Benefits of the Black Pearl Motor include:
- more robust with a stronger gear box (over 25%)
- up to 3 times more holding power
- larger drive gear for added contact and engagement
- six point motor support system vs. two point support system
- fixed soft-touch programming switch
- easy to identify color coded wires
$ 15.00
#14 w/ 3 holes MCD Black Bracket, 90° angle |
$ 30.00
Not sure if this is the correct spring for your shade? This is for shades 15" and under.. Spring width is 8"..
PN- 40.199
A longer spring can be used as long as the width of the tube is longer then the width of the spring and up/stop combined.
Please Call US 866-895-4556 or email us at support@mastertechrv.com
Sold Out
#26 w/ 7 holes MCD Black Bracket, 90° angle |
Sold Out
#25 w/ 7 holes MCD Black Bracket, 90° angle |